High Efficiency XS2600 Wheel Buckt Sand Washer Equipment
Processing capacity: 1-105t/h
Feeding size: 125-250mm
Feed opening: 150×250-300×1300mm
Applied material: barite, marble, talcum, calcite, dolomite, fluorite, kaoline, coal, gypsum.
Introduction to Sand Washer Machine:
The sand washer machines as a kind of highly efficient sand washing plant is mainly used for the separation of sand and other heavy particles from water mixture and undissolved matter contained in that water and washing of the separated material using clean water. The sand washing machines have the advantages of reasonable structure and high productivity. During the washing process, little sand runs off.
Wheel bucket sand washer equipment working principle:
Sand washing machine work, the motor through the V-belt, reducer, gear slow down after the impeller slowly rotating, gravel has a trough into the tank, driven by the impeller rolling, and grinding each other to remove the surface covered with gravel Impurities, while the destruction of sand covered with water vapor layer, in order to facilitate dehydration; at the same time add water, the formation of a strong water, the impurities and the proportion of small foreign body away from the overflow tank and discharge to complete the cleaning effect. Clean sand and gravel from the leaves away, the last gravel from the rotation of the impeller into the trough to complete the cleaning effect of gravel.
Features of Sand Washer Machine
1. Rugged construction
2. Low water consumption
3. Less operating and maintenance costs
4. The efficiency of separating water from sand is high
5. The efficiency of reducing organic matter content is high
wheel bucket sand washer equipment techncial parameters:
| Specification | Processing Capacity(t/h) | Motor Power
(kw) |
| 2208 | 15-40 | 8p 4kw |
| 2611 | 20-65 | 8p 5.5kw |
| 2914 | 50-100 | 8p 7.5kw |
| 3020 | 120-200 | 8p 11kw |
Maintenance Notes of Sand Washer Machine
1.The vent cap of the reduction machine in the spiral China sand washer should be open before use to keep good ventilation to lighten the internal pressure.
2.If the height of lubricating oil is lower than the normal height, some oil of the same type should be added.
3.During the working process of the China Sand Washers, some maintenance should be made to prolong the life of the machine as well as to make the machine work better.
4.Check the temperature of the bearings and the shell of the bucket sand washer, the noise of the engine and if there is an abnormal phenomenon of vibrating.
5.The daily maintenance of the sand screw washing machine can refer to the instructions. Check the foundation bolt of the reduction gears. The connections should not be loose.
LEAVE A MESSAGE We will contact you within 24 hours
